District Council 16 STAR
All Courses
Filters
Locations
Location
Date
Classes through June 2024
Participants will received valuable instruction providing them with lifesaving training that prepares them to respond to an emergency at their workplace.
8h 30m 6am - 2:30pm | SL, PET, LV, FRE, RN, SAC, WAT
General Safety & Equipment Training
Participants will receive a 8 hour Hazwoper refresher course
Painting
Yearly, continuing education for workers course required to maintain the State of California Lead-Related Construction Certification.
Painting
This 2nd part will include hands-on training in the arts of Venetian Plastering, Anaglyptic Wall Veering along with other applications.
Classes through June 2024
This course is a basic review of the skills covered in the written portion of the AGMT certification process. This course will also cover the silicone portion of the hands-on practical testing.
8h 30m 6am - 2:30pm | SL, LV, SAC
Classes through June 2024
AGMT “B” (Curtainwall & Storefront)
This course is a review of the skills covered in the practical portion of the AGMT certification process for the curtainwall and storefront section only.
8h 30m 6am - 2:30pm | SL, LV, SAC
Painting
This course is designed to educate participants on the technique of using an airless sprayer for painting
Clases en Español
In this course participants will begin to learn the basics of English language used in the construction industry.
8h 30m 6am - 2:30pm | SL
Classes through June 2024
In this course participants will receive a demonstration put on by ARDEX for the ARDEX Moisture Control Systems for flooring. Participants will receive a certification from ARDEX upon successful completion of this course.
8h 30m 6am - 2:30pm | SAC, LV, RN, SL
Classes through June 2024
In this course participants will learn the proper use and cleaning of a drywall taping bazooka
8h 30m 6am - 2:30pm | SL, LV
Classes through June 2024
Participants will be trained on layout in the glazing industry
8h 30m 6am - 2:30pm | SL
Classes through June 2024
Participants will be trained in the use of four (4) pieces of construction related equipment: Scissor Lift, Aerial Boom Lift, Forklift and Grade-All
**Training meets new ANSI standards A92.22 and A92.24**
8h 30m 6am - 2:30pm | LV, SAC, SL, RN, FRE
Floor Covering
Receive training on the installation of conventional carpet (stretched in) including tacless strip, padding and seams
Floor Covering
Participants will be given classroom and hands-on training on floor preparation
Classes through June 2024
Class is designed to prepare participants for the CAS Certification Training and Exam.
8h 30m 6am - 2:30pm | SL, LV
Painting
This course will provide basic knowledge and skills on confined spaces in the workplace.
Classes through June 2024
Participants will work hands-on to learn and enhance their pattern cove techniques
8h 30m 6am - 2:30pm | LV
Drywall Finishing
Drywall Repair – Texture Match
Learn techniques of repairing and patching drywall. Also learn how to match existing textures.
Painting
Drywall Repairs for the Painting Industry
Participants will be trained on basic techniques of drywall repair for the painting industry
Classes through June 2024
Drywall Texture Spray Techniques
Participants will be exposed to the multiple types of hand and spray drywall textures, techniques and texturing machinery through classroom and hands-on training.
8h 30m 6am - 2:30pm | SL, FRE
Classes through June 2024
Participants will be trained in the art of applying Venetian Plaster Finish.
8h 30m 6am - 2:30pm | LV, SL
Classes through June 2024
Students will be trained in fall protection and will be able to understand corrective actions associated with fall prevention.
8h 30m 6am - 2:30pm | LV, SL, SAC, FRE, WAT, RN
Glazing
Participants will be trained on Spyder Crane URW295.
8h 30m 6am - 2:30pm | SL
Floor Covering
Participants will be given classroom and hands-on training on floor preparation
General Safety & Equipment Training
OSHA safety training in hazardous communication and avoiding the four most common and fatal construction site injuries.
Classes through June 2024
Participants will attend a training course hosted by Forbo on Marmoleum installation.
8h 30m 6am - 2:30pm | SAC
Classes through June 2024
Participants will be trained on multiple Smart Lift Glass Manipulators
8h 30m 6am - 2:30pm | SL
Glazing
Participants in this course will cover a variety of panic door hardware along with closer door hardware.
8h 30m 6am - 2:30pm | SL
Glazing
Participants will be trained on various glass handrail systems and various codes associated with installation
Floor Covering
Participants will be given classroom training and direction and have an opportunity to learn and practice heat welding on a variety of materials
General Safety & Equipment Training
Infection Control Risk Assessment (ICRA) training is for workers that work in healthcare or other occupied facilities, to understand ICRA procedures to correctly perform work in this environment. This ICRA training includes COVID 19 specific awareness.
Floor Covering
Installation of Woven Carpets NFIC
Participants will attend a training class hosted by the NFIC (Natural Fiber Installation Certification) on the seams of woven carpets.
Classes through June 2024
Intro to Abrasive Blasting Techniques
Participants will get an introduction to abrasive sand blasting, the equipment used and the hazards associated with the job.
8h 30m 6am - 2:30pm | SL, FRE
Painting
Participants will be introduced to the products and application techniques developed for the professional faux finisher.
Classes through June 2024
Participants will get an introduction to the hazards associated with spray painting and the equipment used.
8h 30m 6am - 2:30pm | SL, FRE
Classes through June 2024
Class demonstration on flooring presented by Jon Don
8h 30m 6am - 2:30pm | SL
Floor Covering
Jon-Don Polished Concrete & Kretus Coatings
Participants will attend a training course hosted by Jon Don on the latest concrete flooring technology
Floor Covering
Participants will attend a training course put on by Mapei utilizing Mapei products in the floor covering industry.
Floor Covering
Participants will be instructed on how to install rubber, Tight-Loc and Millwork base.
Floor Covering
Nora Technical Academy Training
Participants will attend a training course put on by nora flooring on the installation of nora rubber flooring.
Classes through June 2024
OSHA 30-A “Introduction to OSHA”. This course will cover mandatory and elective topics required by OSHA.
8h 30m 6am - 2:30pm | SL
Classes through June 2024
OSHA 30-B “Focus Four”. This course will cover mandatory and elective topics required by OSHA
8h 30m 6am - 2:30pm | SL
Classes through June 2024
OSHA 30-C “PPE, Hazards, Elements”. This course will cover mandatory and elective topics required by OSHA.
8h 30m 6am - 2:30pm | SL
Classes through June 2024
OSHA 30-D “Stairways, Ladders, Scaffolds, etc.”. This course will cover mandatory and elective topics required by OSHA.
8h 30m 6am - 2:30pm | SL
Classes through June 2024
The 1st course (“A”) will address laws and regulations, stability principals, and safe operating practices. Classes must be taken in order.
8h 30m 6am - 2:30pm | SL, SAC, LV
Classes through June 2024
This 2nd part (“B”) will include signaling and is a continuation of the 1st course covering most types of slings and basic rigging hardware and signaling techniques.
8h 30m 6am - 2:30pm | SL, SAC, LV
General Safety & Equipment Training
Refresher training course in Rigging & Hoisting
Painting
RRP Lead Renovation and Repair
EPA approved certification for working safely in the renovation industry.
Classes through June 2024
Participants will learn OSHA scaffold regulations, safety guidelines and the hazards associated with operations on and around scaffolding.
8h 30m 6am - 2:30pm | SL, LV, RN, SAC, WAT
Classes through June 2024
SCT – Introduction DC16 and Finishing Trades Associations
Introduction to District Council 16 and the Finishing Trades Associations. This course will take members on an interactive exercise through the multitude of resources and tools available to all DC16 members.
8h 30m 7am - 3:30pm | HSC, CCH, SHI, LV
Classes through June 2024
Participants will develop or enhance their caulking skills
8h 30m 6am - 2:30pm | LV
Classes through June 2024
This course will introduce silica and how to protect workers from exposure of silica dust
8h 30m 6am - 2:30pm | LV, SL, RN, SAC
Classes through June 2024
Open style class practicing skills within the trade
8h 30m 6am - 2:30pm | SL, SAC
Painting
Participants will be exposed to multiple types of Spray Techniques in the classroom and have hands on multiple equipment types.
Survival of the Fittest / ICRA COVID-19
This interactive lecture is developed and presented by nationally recognized author and motivational speaker, Mark Breslin. One time attendance of this STAR class is required for event eligibility.
Classes through June 2024
Students will learn how to choose the best combination of swing stage equipment for each job and how to properly use the equipment.
8h 30m 6am - 2:30pm | SL, FRE, LV, SAC
Classes through June 2024
Participants will learn advanced installation on Tarkett Linoleum
8h 30m 6am - 2:30pm | SL
Classes through June 2024
This is a course on the installation of Tarkett Linoleum.
8h 30m 6am - 2:30pm | SL
Classes through June 2024
Participants will learn advanced installation on Tarkett Vinyl
8h 30m 6am - 2:30pm | SL
Classes through June 2024
Participants will learn to install Tarkett Vinyl
Classes through June 2024
Tarkett Powerbond Certification
Hosted by Tarkett participants will be trained on Powerbond floor covering to receive Tarkett Powerbond Certification
8h 30m 6am - 2:30pm | SL
Classes through June 2024
Temporary Traffic Control & Flagging
Participants will learn proper fundamentals of flagging, moving traffic and signaling directions used by flaggers.
8h 30m 6am - 2:30pm | SL
Glazing
These classes focus on training Glaziers in the use of the “Total Station” layout tool. This tool is used by many of our larger contractors to provide intricate and precise field layout and measurement.
8h 30m 6am - 2:30pm | SL
Glazing
These classes focus on training Glaziers in the use of the “Total Station” layout tool. This tool is used by many of our larger contractors to provide intricate and precise field layout and measurement.
8h 30m 6am - 2:30pm | SL
Glazing
These classes focus on training Glaziers in the use of the “Total Station” layout tool. This tool is used by many of our larger contractors to provide intricate and precise field layout and measurement.
Glazing
These classes focus on training Glaziers in the use of the “Total Station” layout tool. This tool is used by many of our larger contractors to provide intricate and precise field layout and measurement.
Classes through June 2024
Participants will attend a training class hosted by UZIN on the installation of all types of floorcoverings
8h 30m 6am - 2:30pm | SL
Classes through June 2024
This course will cover advanced installation of commercial grade wall covering
8h 30m 6am - 2:30pm | SL, LV
Classes through June 2024
This course will introduce the basics of installing commercial grade wall covering
8h 30m 6am - 2:30pm | LV, SL
Classes through June 2024
Yearly, continuing education for workers to address the yearly Lead training requirements for Washoe County School District in Reno, NV.
8h 30m 6am - 2:30pm | RN
Classes through June 2024
In this course participants will work in class and hands-on to develop welding knowledge and skills and to work towards obtaining an American Welding Society Certification.
8h 30m 6am - 2:30pm | SL, LV
Classes through June 2024
This course will be highly engaging and physical. Participants will learn how yoga, mindfulness and nutrition will improve their physical and mental well being.
8h 30m 6am - 2:30pm | SL
Classes through June 2024
Participants will attend a training class created by Woods Powr-Grip on their different types of equipment which use vacuum to lift, hold and position glass
8h 30m 6am - 2:30pm | SAC
2020 Chevy Camaro
2020 Chevrolet Colorado
2020 Chevy Equinox
2020 Chevy Silverado
2020 Chevy Malibu
ATV
Apple Watch
Beats Headphones
Grill LG1100
Harley Davidson Softail
Harley Davidson Iron 883
Heritage Safe
HP All in one
iPad Pro
LG TV
Samsung TV
Vizio TV
TCL TV
Yamaha Wave Runners VX
Wave Runner Yamaha VX Deluxe
PS4
Xbox One X
Rewarding Your
Achievement-Raffle Day!
We apprecitate your commitment to excellence -- and we show it. Every Course you take earns you a chance to win hundreds of amazing prices. *
Learn More
* Prizes are subject to change